Nav

Power Animals Tutorial

Step-by-step instructions to guide you through your Power Animals Set assembly!

If you’re lucky enough to have your hands on one of our Flashing Card Sets, this tutorial will help guide you through the process of putting it together.

Our easy step-by-step instructions will show you how  to draw a simple circuit using Electric Paint and attach an LED and battery to bring your cards to life.

Even if you don’t have our kit, you can follow this tutorial by drawing your own circuit and cold soldering your components on to it. So go on, get creative with electronics!

Please Note: This product has been discontinued but will be available from our resellers until approximately September 2017.  A list of the resellers stocking it can be found on our FAQ page.

Step-by-step instructions to guide you through your Conductive Encounters Set assembly!  

Conductive Encounters Tutorial

Step-by-step instructions to guide you through your Merry Resistivities Set assembly!

Merry Resistivities Tutorial

Step-by-step instructions to guide you through your Celebration Circuit Set assembly!

Celebration Circuit Tutorial

Step 1

Watch the video!

Links

Step 2

Pin Holes

Let’s get started! First, make four holes with a pin.

Links

Step 3

Insert LED

Insert LED light, push the long leg through + hole and short leg through – hole.

Bend legs apart to secure.

Links

Step 4

Insert Battery

Insert battery, push top leg (over yellow band) through + hole and bottom leg through – hole.

Bend legs apart to secure.

Links

Step 5

Draw Circuit

Here comes the amazing part!

Squeeze a continuous bead of Electric Paint over the white line only.

Make sure to paint onto each component leg to create an electrical connection.

Wait 15 minutes for the paint to dry.

Let the blinking action begin!

Links

Suggested Tutorials

Step-by-step instructions to guide you through your Conductive Encounters Set assembly!  

Conductive Encounters Tutorial

Step-by-step instructions to guide you through your Merry Resistivities Set assembly!

Merry Resistivities Tutorial

Step-by-step instructions to guide you through your Celebration Circuit Set assembly!

Celebration Circuit Tutorial

Categories

Bare Conductive

Date Posted

2010/07/22

Rating

[rate]